Facilities > Engineering Design

PLC Nylon Vacuum Casting System

Type

- Hardware

Description

This PLC Nylon Vacuum Casting System technology has all the advantages such as: Quick, accurate, multi-segment silicone mould making within 12 hours. Use any type of model for mould making Demould in any 6 minutes after casting Nylon Extremely thick and thin walled parts Materials provided have all the properties of injection moulded nylon polymers. Nylon casting are air, gas and water tight Suitable for crash testing Can be welded and glued Chemically resistant Can replace metal components due to high strength and rigidity   In general, PLC Nylon Vacuum Casting System in TMR&D serves; Small lot production capability in TMR&D Flexibility in selecting material for plastic materials for prototype. Ability to fabricate transparent plastic parts Shorten time to duplicate parts in house by avoiding extra process eg outsourcing and queuing time. Cost saving in term of outsourcing cost and materials. Flexibility in managing design changes & modifications Opportunities to upgrade the facilities to Rapid Tooling technology by using vertical injection molding machines (Mini Type)

Specifications

a) Casting capacity: approx. 6 kg b) Max. mould dimensions: approx. H750 x W900 x D750 mm c) External dimension: approx. H1930 x W1510 x D900 mm d) Mould – lift capacity: 80 kg e) Type of PLC: Colour 9” touch screen f) High capacity vacuum pump: 65 m³/h g) Vacuum level: Up to 1,15 Torr, 0.00153 bar. h) Noise level: 65 dBA i) Power supply: 400V, 50/60Hz, 3 phase j) Total weight: approx. 1400 kg

Manpower

-